PXe-PA6000 Power Meter

Q: What is the PXe-PA6000 Power Meter used for?

The PXe-PA6000 is used for measuring power consumption and basic electrical performance on test benches, in workshops and during service checks. It can measure watts, VA, power factor, energy consumption, voltage, current, resistance and frequency.

Q: What is the difference between a power meter and a power analyser?

A power meter is generally used for practical measurement of common electrical values such as power, voltage, current and energy consumption. A power analyser is normally used for more detailed testing, such as harmonic analysis, multi-channel efficiency measurement and formal validation work.

Q: Can the PA6000 measure power factor?

Yes. The PA6000 measures power factor as well as active power, apparent power and energy consumption, making it useful for checking how connected loads behave electrically.

Q: Can the PA6000 be connected to a computer?

Yes. The PA6000 includes an RS-232 interface and supplied software for transferring and analysing measurement data on a computer. The current page also shows software capability for displaying and storing measured values over time.

Q: Can the PA6000 measure current without breaking the circuit?

Yes, when used with a suitable clamp or current transformer arrangement. The page describes clamp and CT input options, including current converter support and an optional current adaptor.

Q: Is the PA6000 suitable for static frequency converter testing?

It may be useful for basic checks on smaller systems or connected loads, but it should not be positioned as the main instrument for full SFC commissioning. For detailed SFC testing, harmonics, efficiency and multi-channel analysis, the PA9xx Series power analysers are more appropriate.

PX Electronics PA6000 Power Meter provides practical bench-top measurement for checking power consumption, load behaviour and basic electrical performance. Designed for workshops, test benches, service teams and product validation work, the unit measures active power, apparent power, power factor, energy consumption, voltage, current, resistance and frequency in a compact tabletop format.

With true RMS measurement, RS-232 output and supplied analysis software, the PA6000 is suited to routine power checks, fault finding, energy consumption testing and supporting lower-power electrical test applications. Optional current clamp and CT input capability allow current and power measurements to be made directly or indirectly, depending on the installation and test requirements.

Technical Highlights for Bench Power Measurement:

Practical power measurement
Measures power, energy consumption, voltage, current, power factor, frequency and resistance for workshop and bench testing.

True RMS measurement
Provides true RMS readings for AC voltage and current when testing real electrical loads.

Flexible current input
Supports direct input, clamp measurement and CT input depending on the test setup.

Data output
The RS-232 interface allows measured values to be transferred to a computer for analysis or recording.

Portable bench-top format
Durable tabletop enclosure with carrying handle, suitable for workshops, laboratories and service use.

Typical Applications:

Power consumption testing
Workshop fault-finding
Bench electrical testing
Low-power product validation
Appliance and equipment checks
Power factor measurement
Energy consumption measurement
Service and maintenance diagnostics
Load behaviour checks
Support testing for inverters and AC power supplies

The PXe-PA6000 Power Meter is designed for practical bench-top measurement of electrical performance, power consumption and load behaviour. It provides a clear way to check voltage, current, power, energy use and power factor during workshop testing, product checks and service diagnostics.

Measurement parameters
Measures active power, apparent power, energy consumption, power factor, AC voltage, AC current, DC voltage, DC current, frequency and resistance.

Low-power resolution
Offers 0.1 W resolution below 1000 W, making it suitable for low-power equipment checks, including LED lamps, small appliances and electronic products.

Display and hold functions
A large LCD display allows key values, such as power, power factor, voltage, and current, to be viewed simultaneously. Data hold and peak hold functions are included for capturing readings during testing.

Alarm functions
High and low alarm settings are available for power and VA measurement, helping users identify readings outside expected limits.

Current measurement options
Supports direct current input, current clamp measurement and CT input, allowing the meter to be adapted to different test setups.

Computer interface
RS-232 output allows measured values to be transferred to a computer for analysis, recording and reporting.

Power and safety
Can be powered from batteries or an AC-DC adaptor, with low battery indication, over-input indication, CE marking, IEC 1010-1 and CAT II 600V safety rating.

What is the PXe-PA6000 Power Meter used for?

What is the difference between a power meter and a power analyser?

Can the PA6000 measure power factor?

Can the PA6000 be connected to a computer?

Can the PA6000 measure current without breaking the circuit?

Is the PA6000 suitable for static frequency converter testing?

What are you looking for?

Technical Specification
Function	Measurement, Range, Accuracy, Resolution
Measurement of Real Power (AC, real value of power), Direct Measurement	1 W – 6 kW; 1 W; ±1.5% + 1 digit
Measurement of Real Power (AC, real value of power), with Adapter ext. or Current Converter	1 W – 999.9 kW; 1 W; ±1.5% + 1 digit
Measurement of Apparent Power (AC)	0.01 VA – 9.999 kVA; 0.01 VA; ±1.5% + 1 digit
Power Factor	0.00 – 1.00; 0.01; ±1.5% + 2 digit
kWh Counter	0.001 Wh – 9.999 kWh; 0.001 Wh; ±1% + 1 digit
ACV/DCV	0.1 V – 600 V; 0.1 / 1 V; ±1% + 1 digit
ACA eff/rms DCA eff/rms	Direct maximum 10 A; 10 mA resolution, with induction head max. 1,000 A; 1 A ±1% + 1 digit
ACA with Clamps	Up to 2,000 A (depending on clamps)
Frequency	10.0 – 999 Hz; 0.1 Hz; ±1% + 1 digit
Ohms	1 Ω – 19.99 Ω; 1 / 10 Ω; ±1% + 1 digit
Display	93 mm × 52 mm multi-functional LCD
Operating Conditions	Max. 80% RH/0 to 50°C/32 to 122°F
Power	6 AA batteries or mains adapter
Dimensions	280 mm × 210 mm × 90 mm/11 × 8.2 × 3.5 in
Weight	1,600 g/56.4 oz

PXe-PA6000 Power Meter

Technical Highlights for Bench Power Measurement:

Featured Products

PXe-PA9xx Series Power Analysers

28V DC and 400Hz Aircraft Ground Power Units

PXe-PI150 Variable Speed Motor Drive

PXe-PI550 High Performance Current Vector Inverter

PXe-AFV-P Programmable AC Power Source

PXe Three Phase Static Frequency Converters